Welcome to the Woodcraft Woodworking Adventures Community!

One of the best things about our hobby (woodworking) is learning and sharing from other woodworkers. Woodworkers of all skill levels and focus – turners, carvers, cabinet-makers and the weekend hobbyist can benefit from a little help of inspiration every now-and-then. Help, focus and inspiration are the goals of Woodworking Adventures.

Within the “pages” of this site you can create discussion groups and forums, share photos of your work with other woodworkers, network, enter Woodcraft contests and read our blog. Together we can build a community of woodworkers that support and inspire each other. Now go make some sawdust!

Our Blog
Woodworking Adventures, where you can read about other woodworkers, techniques and tools, and learn the story behind some of your favorite tools and personalities. We’ll be breaking the mold of a typical blog and hope to be a place where, not only can you read about your hobby, but also contribute. Let’s enjoy the adventure of woodworking together!
Customer Gallery
It’s your turn to show off! If you liked the Woodcraft Brag Book then you’ll love our Customer Gallery. Strut your stuff a little, you spend a lot of time on your passion. Share your best pieces with your fellow woodworkers! We accept submissions from woodworkers of all skill levels, so whether you’re a Scott Phillips or Tommy Mac wannabe, or just a weekend shop warrior let us see what you’ve got!

Blog

Here Are Some of Our Latest Blog Posts > >

Bowclamp – It’s a “Good Caul”

Bowclamp_ftimg

CLICK HERE FOR MORE INFORMATION For a caul to work properly, and evenly distribute clamping pressure, the caul’s curve must be “perfect”. If you are like most woodworkers and have had less than satisfactory results when using homemade cauls, it is most likely due to a less than perfect curve. Using modern CNC (Computer Numerical Control) technology, and several years of wood research, Bowclamp® developed a process that creates a true curve on quartersawn hard maple blanks to ensure perfectly even distribution of clamping pressure across a clamped surface. So if you are tired of getting... Read More

By

Woodcraft Unplugged with Charlie Farren

Charlie Farren1

In a recent Acoustic Guitar Class, Woodcraft’s regional East coast field consultant, Scott Dixon and longtime acquaintance Charlie Farren, musician and lead singer for The Joe Perry Project, Farrenheit and Farren Butcher, Inc. (FBI), hooked up at our Woburn Massachusetts store, for a little jamming session and… a little U.S. Guitar woodworking… Check out this video produced by Scott Dixon with Charlie Farren Night at Woodcraft: Dixon said, “The class members had a great time learning and building guitars, and enjoyed Charlie being part of the class and playing his... Read More

By

Forrest Saw Blades – NEW Cutting Edge Technology

153358&153357PlyVeneer Worker70T

The newest blade from Forrest Manufacturing is the 10″ Ply Veneer Worker with 70 Teeth, and is specifically designed to work with man-made materials in the plywood, vinyl clad, composite and veneer arena. Each tip is made from super hard, long life micro-grain carbide, and the ATB (35° Alternate Top Bevel) produces the smoothest cut ever seen in a hand-straightened saw blade. The 10° face hook allows for easier feed on table saws, and sides are chamfered to eliminate heat buildup and chip clearing. This thin (3/32″) kerf blade is 10″ in diameter and has a 5/8″ arbor.... Read More

By

Contests

Enter a Contest > >

Community

Create and Join Groups or Forums > >

© 2012 Woodcraft Supply LLC

Powered by WordPress, BuddyPress, PMD and WDS